Rauch AXIS ISOBUS, Инструкция по эксплуатации, Страница: 73 / 110

Operation AXIS ISOBUS
67
4
4.11 Operating lights (SpreadLight)
In this menu, the SpreadLight function can be activated and the spreading pattern
can be monitored even in the night mode.
The operating lights are switched on and off via the machine control unit in the
automatic and/or manual mode.
Figure 4.22: SpreadLight menu
[1] Turn off delay
[2] Manual mode: Switch on operating lights
[3] Activate automatic mode
Automatic mode:
In the automatic mode, the operating lights are switched on as soon as the me-
tering sliders open and the spreading process starts.
1. Open the Main menu > SpreadLight menu.
2. Check the menu entry SpreadLight AUTO [3].

The operating lights are switched on when the metering sliders open.
3. Enter a turn off delay [1] in seconds.

The operating lights will switch off after the entered delay when the me-
tering sliders are closed.

Range from 10 to 100 seconds.
4. Delete the check mark in the menu entry SpreadLight AUTO [3].
 The automatic mode is deactivated.
Manual mode:
In the manual mode, the operating lights can be switched on and off.
1. Open the Main menu > SpreadLight menu.
2. Tick the check box in the Activate [2] menu item.
 The operating lights are switched on and remain on until the check box is
unchecked or the menu is exited.
2
3
1