Rauch AXIS ISOBUS, Инструкция по эксплуатации, Страница: 42 / 110

Operation AXIS ISOBUS 4
36
4.4.9 Fertiliser chart
In these menus, you can create and manage your own fertiliser charts .
Create new chart entry
Up to 30 entries can be created in the Machine control unit.
1. Open the Fertiliser settings > Fertiliser chart menu.
Figure 4.7: Fertiliser chart menu
[1] Page number, total number of pages
[2] Display for a fertiliser chart filled with values
[3] Indicates an active fertiliser chart
[4] Fertiliser chart name field
[5] Empty fertiliser chart
[6] Chart number
2. Select an empty entry.
The
name field consists of the fertiliser name, the working width and the
spreading disc type.
 The selection window is displayed.
NOTICE
Selecting a fertiliser chart has an effect on the fertiliser settings, the machine
control unit and the mineral fertiliser spreader. The set application rate is over-
written by the stored value from the fertiliser chart.
NOTICE
You will be able to automatically manage fertiliser charts and to transfer them
from your ISOBUS terminal.

FertChartApp : Contact your dealer to install the FertCart app on your ISO-
BUS terminal.
1
2
3
6
5
4