Rauch AXIS H EMC Series Скачать руководство пользователя страница 108

Страница: 108 / 132

Maintenance and repair

102

9.6

Opening the protective grid in the hopper

The protective grids in the hopper lock automatically by means of a protective grid
lock.

Figure 9.4:

Protective grid lock open/closed

In order to avoid an inadvertent opening of the protective grid, the protective grid
lock can only be released by using a tool (e.g. by means of the adjustment lever).

WARNING

Risk of injury due to moving parts in the hopper

There are moving parts in the hopper.
There is a risk of injury to hands and feet during commissioning
and operation of the machine.



It is important that the protective grid is installed and locked
before commissioning and operating the machine.



The protective grid may

only

be opened for maintenance

purposes or in the event of a fault.

Содержание AXIS H EMC Series





































































































































Результаты поиска

Содержание AXIS H EMC Series

Отзывы:

Похожие инструкции для AXIS H EMC Series

Бренды по названию

Популярные бренды

Rauch AXIS H EMC Series, Инструкция по эксплуатации

Результаты поиска

Содержание AXIS H EMC Series

Отзывы:

Похожие инструкции для AXIS H EMC Series

Бренды по названию

Популярные бренды