Rauch Axent Isobus, Инструкция по эксплуатации

Страница: 67 / 74

Loading with AXENT ISOBUS machine control unit
61
5
5.3 Loading in lime operation
Lime operation depends on the forward speed.
Requirement:

The lime operation operating mode is selected.
- See 4.7.2: Lime operation, page 38 .

In the AXIS H ISOBUS machine control unit, the U2 spreading disc is selected
and the values are set in the
Fertiliser settings menu.
- See 4.3: Interaction between both machine control units, page 27 .
Function/control Operating screen display

Press Start loading .

Loading is active.

Start spreading.

The speed of the conveyor belt and the pre-
metering slide opening are automatically ad-
justed to the forward speed.

Press Start loading in the headlands.

The conveyor belt is stopped.

The pre-metering slides remain open.

Press Start loading again during travel into
the field.

The conveyor belt is started.

At the end of operation, press Start loading .

The conveyor belt is stopped.

Press conveyor belt pause.

Close the pre-metering slides.

Loading is completed.