Rauch Axent Isobus, Инструкция по эксплуатации

Страница: 63 / 74

Loading with AXENT ISOBUS machine control unit
57
5
5 Loading with AXENT ISOBUS machine control unit
5.1 Loading in automatic operating mode
Loading is fully automatic and always in the same sequence.
Requirement:

The automatic operating mode is active.
- See : Automatic, page 35 .
NOTICE
The sensor conditions and loading can be observed on the operating screen.
However, the messages are displayed
without sound .
Function/control Operating screen display

The loading function is active.

One of both level sensors (LLST or LRST)
reports empty.

Open the pre-metering slides.

The conveyor belt starts up simultaneously.

Fertiliser flow runs into the spreading unit
hopper.

Both level sensors (LLST or LRST) are
dampened.