Rauch AERO ISOBUS, Дополнительные инструкции

Страница: 45 / 66

Fig. 23: Test/diagnosis; Example: Distance Control
No. Designation Description
1 Status of the Distance Controller
• 1/3: Manual mode
• 2/4: Automatic mode
• 255 / 0: Controller is still starting up and
initializing.
• 120: Controller cannot be reached/does
not respond.
2 Error bits 1 and 2 of the Distance Controller
• Bit 1: Distance Control error
• Bit 2: Distance Control status
u Check to make sure that all cables and
other lines (hydraulic system, sensors,
etc.) are connected correctly and in
proper condition.
u For all other sources of error, register
with the customer service department
and provide the error code.
3 Current height of left/right boom end section If the value 65535 is displayed, there is no
communication to the controller (ECU-Mode
120)
4. Operation
AERO ISOBUS 5903001
45