Machine adjustments
51
7
7.6.2
Sharp limitation of the right-hand spreading edge
For a sharp limitation on the right-hand spreading edge, the spreading pattern
must be adjusted to left-hand asymmetric spreading, as seen in the direction of
travel.
In order to obtain an even spreading pattern you must also adjust the one-sided
delivery slider.
Adjusting the one-sided delivery slider
Figure 7.8:
Adjusting the one-sided delivery slider
[1] Number scale on the scale plate
[2] Setscrew
[3] Setting lever
1.
Loosen the setscrew [2] on the one-sided delivery slider.
2.
Move the setting lever [3] to the desired position.
Moving the lever in direction of
higher
values: Slider moves to
closed
po-
sition.
Moving the lever in direction of
lower
values: Slider moves to
opened
po-
sition.
3.
Tighten the setscrew [2].
4.
Check the spreading pattern (visual check or measuring scale) and correct
the setting, if necessary.
2
3
1
Содержание 18.1
Страница 30: ...Machine data 4 24...
Страница 32: ...Transport without tractor 5 26...
Страница 108: ...Service and maintenance 9 102...
