6
Error messages S 200 | S 225 | S 275
The rapidcount S is a reliable banknote counter. Nevertheless, error messages can occur, according to the fact that
especially suspicuos banknotes are checked. As described in the previous chapter, the banknote counter automati-
cally configures each time it is turned on. This includes, among other things, a test of all sensors.
Error codes
Action
SKEW BANKNOTE
Please remove all banknotes and count again.
DOUBLE NOTE
Please remove all banknotes and count again
MOTOR PROBLEM
Turn off and check the banknotepath.
PROBLEM WITH HOPPER SENSOR
Turn off, check sensor and try again.
PROBLEM WITH STACKER SENSOR
Turn off, check sensor and try again.
PROBLEM WITH MG SENSOR
Turn off, check sensor and try again.
PROBLEM WITH UV SENSOR
Turn off, check sensor and try again.
PROBLEM WITH COUNTING SENSOR LEFT
Turn off, check sensor and try again.
PROBLEM WITH COUNTING SENSOR RIGHT
Turn off, check sensor and try again.
SUSPECT BANKNOTE
Please check last banknote in stacker.
DIFFERENT DENOMINATION
Please remove last banknote and press start.
BATCH FULL
Please remove batch of banknotes or press start to count next batch.
[EN]
