Rational iCombi Classic Series, Руководство по эксплуатации

Страница: 21 / 64

4 | How to work with the unit
Operating instructions 21 / 64
4.9 Removing hinging rack
1. Hold the hinging rack in the middle of the top trays.
2. Press the hinging rack upwards (A).
3. Tilt the left hinging rack in the cooking cabinet (B).
4. Take the hinging rack off the hinges and remove it from the cooking cabinet.
4.10 Integrated fat drain
If your unit is equipped with the optional integrated fat drain, dripping fat is collected in the cooking chamber and
directed into the fat collecting container.
1 Ball valve handle 2 Drain pipe
3 lalfer pipe with bayonet Filler pipe with
bayonet fastener 4 Grease drip collector
1. Open the cabinet door.
2. Remove the drain pipe fastener.
3. Place the fat collecting tray in the cooking chamber, so that the opening of the fat collecting tray is on the drain
pipe.
4. Place a fat container under the drain on the outside of the unit, e.g. a canister.
5. Insert the filler pipe of the integrated fat drain into the fat collecting container.
6. Insert the bayonet fastener of the filler pipe onto the drain.
7. Lock the bayonet fastener.
8. Turn the handle of the ball valve to a horizontal position.
>>
The ball valve is open. Dripping fat can now be collected in the fat collecting container.
Replace the fat collecting container
CAUTION
The outside of the unit, the drain and the fat collecting container can get very hot
You can burn yourself if you come into contact with hot functional parts.
1. Wear your personal protective equipment when changing the fat collecting container.
1. When the fat collecting container is full, turn the handle of the ball valve to the vertical position.
>
The ball valve is closed.
2. Loosen the bayonet fastener.
3. Replace the fat collecting container.