Raspberry Pi RASPIVEND, Быстрая справка

Страница: 34 / 51

27. MDBCashlessRevalue
GUI command
Command Parameters/Comments
MDBCashlessRevalue(N) “N” is the address of the cashless to revalue (1 for the first
cashless device and 2 for the second cashless device)
RASPIVEND daemon answer
Answer Parameters/Comments
{"MDBCashlessRevalue":"success"}
or
{"MDBCashlessRevalue":"failed"} This command will send load the CurentCreditCash value to the
cashless.
You must use the MDBPoll command to verify the response of
the cashless system according to Table 4 on page 16).
Also, your application must handle the maximum revalue
settings for the cashless system. You have to set the cashless
revalue only in it's aloud range. If you will not manage this, then
the cashless can randomly goes to overflow.
28. MDBCashlessEndSession
GUI command
Command Parameters/Comments
MDBCashlessEndSession(N) “N” is the address of the cashless to close the session (1 for the
first cashless device and 2 for the second cashless device)
RASPIVEND daemon answer
Answer Parameters/Comments
{"MDBCashlessEndSession":"success"}
or
{"MDBCashlessEndSession":"failed"} This command will force the cashless system to close the
current session. If the media is not removed, most of the time,
the cashless system will automatically open a new session.
© 2016 – AUTOMATROM SRL – www.vendingtools.ro