Rasonic RS-V9RK, Руководство по эксплуатации

Страница: 13 / 16

13
English
How to use
Note
POWERFUL/
QUIET
,
NANOE-G
• Can be activated in all modes and can be
cancelled by pressing the respective button
again.
POWERFUL/
QUIET
• Cannot be selected at the same time.
Operation conditions
Use this air conditioner under the following
temperature range.
DBT : Dry bulb temperature
WBT : Wet bulb temperature
Temperature (°C)
Indoor Outdoor
DBT WBT DBT WBT
COOL
Max. 32 23 43 26
Min. 16 11 16 11
NANOE-G
To purify the air
NANOE-G
• nanoe-G starts automatically when the unit is
turned on with OFF/ON .
• Can be activated even when the unit is turned off.
In this condition, the unit will operate as a fan with
AUTO fan speed and fl ap swing.
To deactivate viruses/bacteria on the fi lter
NANOE-G
POWER
• After the unit is turned off, the nanoe-G in- fi lter
deactivation may activate up to 150 minutes.
Turning on the unit cancels this operation.
• To disable this operation in the future, press and
hold
NANOE-G
until a short beep sound is heard. This
will not disable the nanoe-G to purify the air.
• To restore the nanoe-G in- fi lter deactivation,
press and hold
NANOE-G
until a long beep sound is
heard.
AIR SWING
To adjust vertical airfl ow
direction
(Remote control display)
• Keeps the room ventilated.
• In COOL/DRY mode, if AUTO is set, the fl ap
swings up/down automatically.
• Do not adjust the fl ap by hand.
To set the timer
To turn ON or OFF the unit at a preset time.
TIMER
SET
CANCEL
ON
OFF
1 2 3
CANCEL
3
2 1 3
1
Select ON or OFF timer
Example:
OFF at 22:00
OFF
OFF
TIMER
2
Set the time
2
OFF
TIMER
3
Confi rm SET
OFF
TIMER
TIMER
• To cancel ON or OFF timer, press
ON
or
OFF
then
press
CANCEL
.
• When ON Timer is set, the unit may start earlier (up
to 15 minutes) before the actual set time in order to
achieve the desired temperature on time.
• Timer operation is based on the clock set in the
remote control and repeats daily once set. For clock
setting, please refer to Quick guide.
• If timer is cancelled manually or due to power
failure, you can restore the previous setting (once
power is resumed) by pressing
SET .
Auto Restart Control
• If power is resumed after a power failure, the
operation will restart automatically after a period
of time with previous operation mode and
air fl ow direction.
• This control is not applicable when TIMER is
set.