background image

1

Precautions

WARNING

Do not connect air conditioner to multi-purpose socket.

This appliance can be used by children aged from 8 

Operation and Maintenance

If the supply cord is damaged, it must be replaced by 
the manufacturer, its service agent or similarly qualified 
persons in order to avoid a hazard.

Do not spray water on indoor unit. It may cause electric
shock or malfunction.

Otherwise, it may cause fire hazard.

Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by 
children without supervision.

years and above and persons with reduced physical, 
sensory or mental capabilities or lack of experience 
and knowledge if they have been given supervision or 
instruction concerning use of the appliance in a safe 
way and understand the hazards involved. 

Do not wash the air conditioner with water to avoid 
electric shock.

After removing the filter, do not touch fins to avoid injury.

Do not use fire or hair dryer to dry the filter to avoid
deformation or fire hazard.

Do disconnect power supply when cleaning air 
conditioner. Otherwise, it may cause electric shock.

Содержание RS-V12KE

















































Отзывы: