10
ECO function
SLEEP function
ECO
Press this button under COOL Mode to enter the energy efficient mode.
Note:
This function is only available under COOL mode
.
SLEEP
Under cooling mode, press this button, the remote controller will adjust the temperature
automatically to 24 C/75 F, fan speed of Auto to save energy (only when the set temperature
is less than 24 C/75 F). If the set temperature is above 24 C/75 F, press the ECO button,
the fan speed will change to Auto, the set temperature will remain unchanged.
NOTE:
Pressing the ECO button, or modifying the mode or adjusting the set temperature to less
than 24 C/75 F will stop ECO operation.
Under ECO operation, the set tmeperature should be 24 C/75 F or above, it may result in
insufficient cooling. If you feel uncomfortable, just press the ECO button again to stop it.
O
O
O
O
O
O
O
O
O
O
The SLEEP function is used to automatically adjust the temperature to achieve sleep comfort(and
don’t need the same temperature settings to stay comfortable). This function can only be activated
via remote control.The sleep function is not available in Fan or Dry mode.Please refer to the
OPERATION & INSTALLATION
MANUAL for more details.
FAN SPEED
2s
Keep pressing Fan button for more than 2 seconds
to activate/disable Silence function(some units).
Due to low frequency operation of compressor, it may result in insufficient cooling capacity.
Press ON/OFF, Mode, Sleep, Turbo or Clean button while operating will cancel silence function.
Silence function
