13
Introduction for buttons on remote controller
Press this button to set clock time. " " icon on remote controller will blink. Press
"▲" or " " button within 5s to set clock time. Each pressing of "▲" or " " button,
clock time will increase or decrease 1 minute. If hold "▲" or " " button, 2s later,
time will c
hang
e quickly. Rele
a
se this button when re
a
chin
g
your require
d
time.
Press "CLOCK" button to confirm the time. " " icon stops blinking.
Note:
● Clock time adopts 24-hour mode.
● The interval between two operation
s
can
’
t exceeds 5s. Otherwise, remote contro-
ller will quit setting status. Operation for
TIMER ON/TIMER OFF is the same.
CLOCK button
11
▲
▲
▲
Note:
● Under on and off status, you can set
TIMER OFF or
TIMER ON simultaneousl
y.
● Before setting
TIMER ON or
TIMER OFF, please adjust the clock time.
● After starting up
TIMER ON or
TIMER OFF, set the constant circulating valid.
After that, air conditioner will be turned on or turned
o
ff according to setting time.
ON/OFF button has no
e
ffect on setting. If you don’t need this function, please
use remote controller to cancel it.
the remote controller near the object of high temperature or low temperature in
order to avoid detecting inaccurate ambient temperature. When I FEEL function
is turned on, the remote controller should be put within the area where indoor
unit can receive the signal sent by the remote controller.
● TIMER ON button
"TIMER ON" button can set the time for timer on.
After pressing this button, " "
icon disappears and the word "ON" on remote controller blinks. Press "▲" or
" "
button to adjust
TIMER ON setting.
After each pressing "▲" or " " button,
TIMER ON setting will increase or decrease 1min. Hold "▲" or " " button, 2s
late
r
, the time will change quickly until reaching your required time.
Press "TIMER ON" to confirm it.
The word "ON" will stop blinking. " " icon
resumes displaying. Cancel
TIMER ON: Under the condition that
TIMER ON is
started up, press "TIMER ON" button to cancel it.
● TIMER OFF button
"TIMER OFF" button can set the time for timer
o
ff.
After pressing this button," "
icon disappears and the word "OFF" on remote controller blinks. Press "▲" or
" " button to adjust
TIMER OFF setting
.
After each pressing "▲" or " " button,
TIMER OFF setting will increase or decrease 1min. Hold "▲" or " " button, 2s
late
r
, the time will change quickly until reaching your required time.
Press "TIMER OFF" word "OFF" will stop blinking. " " icon resumes displaying.
Cancel
TIMER OFF. Under the condition that
TIMER OFF is started up, press
"TIMER OFF" button to cancel it.
▲
▲
▲
▲
TIMER ON /
TIMER OFF button
10
▲
▲
