7
Rasha Professional A/S | 1800 Rustin Ave, Riverside, CA, 92507 | 951-654-3585
Rashaprofessional.com | [email protected]
Connect the DMX512 console output port to the first slave device DMX input, and
connect the first slave device DMX output signal to the second slave device DMX input
signal, until all slave connections are complete.
During the installation, if the signal line is too long, or in relatively noisy electrical
environments, such as dance halls, we recommend using DMX terminator (circuit
connection). It can avoided the control signal turbidity due to electrical noise.
DMX terminal is connected by a simple XLR head (2-pin and 3-pin) connecting a 120
Ω
resistor, please set the terminal into the final device output port, please refer to the
diagram.
