Raritan SX32 Скачать руководство пользователя страница 49

Страница: 49 / 178

HAPTER

ONSOLE

EATURES

Figure 43 Port Editing Display

Configure Port Parameters

•

Name

: Name that associates the serial port with the connected target device; can be up to 64 characters

in length and must be unique from the other port names (only 20 characters are displayed on Port
access buttons)

•

Application

: Application type associated with a specific port, two are provided: default applications

RaritanConsole (contact Raritan for additional applications) and PowerBoard (for use with Raritan
Power Control units)

•

Baud rate

: Baud rate of the serial port; should match that of the target device connected to the port

(valid choices are 1200, 1800, 2400, 4800, 9600, 19200, 28800, 38400, 57600, 115200)

•

Parity/Data bits

: Parity/Data of the serial port; should match the setting of the target device (valid

choices are None/8, Even/7, Odd/7)

•

Parity check

: Enabling or disabling of the Parity function of the serial port; should also match the

target device’s setting

•

Xon/Xoff

: Can be enabled if the target system supports this feature; will allow the unit to control the

data flow and reduce the chance of data loss

•

Hardware Flow Control RTS/CTS

: Can be enabled if the target system supports this feature; will

allow the unit to control the data flow using hardware signals and reduce the chance of data loss.

Edit Port Parameters

Select an entry to modify.

Click on the [

Edit

] button.

The selected entry appears in the lower half of the screen.

Make changes to the fields as needed.

Click on the [

Update

] button to load the changes or click on the [

Cancel

] button to ignore changes.

Click on the [

Save

] button.

Содержание SX32



















































































































































































Результаты поиска

Содержание SX32

Отзывы:

Raritan SX32, Инструкция по установке и эксплуатации, Страница: 49 / 178

Результаты поиска

Содержание SX32

Отзывы: