Raritan SX32 Скачать руководство пользователя страница 39

Страница: 39 / 178

HAPTER

ONSOLE

EATURES

URL with Port Number

Type the following URL into the browser's location bar:

https://<IPAddress>/dpa.htm

−

IPAddress

: This is the IP Address of the unit. This can be either the actual IP address of the unit

or IPAddress assigned for a modem.

−

“

portnumber

”: Port number for which a console is required.

Note: https must be used for direct port access. http cannot be used.

Example:

https://192.168.50.81/dpa.htm?port=“1”

The Direct Port Access display will appear.

Enter Login Name and Password and click on the [

Login

] button.

When the security warning appears (only once for the session); click on the [

Yes

] button.

The console display will appear.

Figure 33 Direct Port Access Display

To exit the application from direct port access, close the Raritan Console window and close the browser
window (by selecting

File

Close

, or by clicking on the “X” in the top right-hand column).

Error Conditions

If the user name, password, or port number is invalid or incomplete, an error message will be displayed in
the browser.

Invalid Port Specified:

If the port specified in the URL is invalid, the user is requested to login again with the correct user name
and password, and a valid port number:

Figure 34 Invalid Port Number Error Display

Содержание SX32



















































































































































































Результаты поиска

Содержание SX32

Отзывы:

Raritan SX32, Инструкция по установке и эксплуатации, Страница: 39 / 178

Результаты поиска

Содержание SX32

Отзывы: