Raritan SX32 Скачать руководство пользователя страница 25

Страница: 25 / 178

HAPTER

ONSOLE

EATURES

Chapter 4: Console Features

There are six drop-down menus available in the menu bar of the console window:

•

Emulator

•

Edit

•

Chat

•

Tools

•

Script

•

Help

Emulator

Settings

The Settings window displays the Terminal Type and Cursor Type for the console window.

•

The unit supports Terminal Type VT100/ANSI, which cannot be changed.

•

The Cursor Type can be either Line or Block, depending on your preference. The default cursor is Line
type, but can be changed by clicking on the appropriate radio button.

To View Settings:

Click on

Emulator

in the main menu.

Select

Settings

from the drop-down menu.

Figure 18 Settings Command and Settings Window

Adjust settings as needed.

Click on the [

] button to close the Settings window.

Содержание SX32



















































































































































































Результаты поиска

Содержание SX32

Отзывы:

Raritan SX32, Инструкция по установке и эксплуатации, Страница: 25 / 178

Результаты поиска

Содержание SX32

Отзывы: