Raritan SX32 Скачать руководство пользователя страница 139

Страница: 139 / 178

PPENDIX

RSA

ACE/S

ERVER

ONFIGURATION

129

Click on the [

Assign Profile

] button and select the appropriate profile from the Select Profile window.

Only one profile can be assigned to each user. Click on the [

] button.

Figure 105 Profile Selection Display

10.

To control access to specific units, click on the [

Agent Host Activations

] button. Select the

appropriate units from the

Available

Agent Host Activation

list and click on the [

Activate On Agent

Hosts

] button.

Figure 106 Unit Selection Display per User

11.

To configure the Dominion SX device to use RSA/ACE Server as the RADIUS authentication server,
log on to the unit with the local administrative account, click on the [

Configuration

] button in the left

panel, and select the

RADIUS

tab. Configure the appropriate RADIUS Server IP address, Shared

Secret (encryption key), and Port. The unit is now ready to authenticate the user using the ACE
RADIUS server.

12.

At the login screen for the Dominion SX unit, enter the

Username

and

Passcode

(a combination of the

PIN and a number generated on the SecureID token). Authentication will be made using the RADIUS
server and access granted based upon user profile.

Содержание SX32



















































































































































































Результаты поиска

Содержание SX32

Отзывы:

Raritan SX32, Инструкция по установке и эксплуатации, Страница: 139 / 178

Результаты поиска

Содержание SX32

Отзывы: