Raritan PXE, Руководство пользователя

Страница: 92 / 382

Chapter 6: Using the Web Interface
76
Setting the EnergyWise Configuration
If a Cisco
®
EnergyWise energy management architecture is implemented
in your place, you can enable the Cisco EnergyWise endpoint
implemented on the PXE device so that this device becomes part of the
Cisco EnergyWise domain.
The Cisco EnergyWise feature implemented on the PXE is disabled by
default.
To set the Cisco EnergyWise configuration:
1. Choose Device Settings > EnergyWise. The EnergyWise
Configuration dialog appears.
2. In the Enable EnergyWise field, select the "enable" checkbox to
enable the Cisco EnergyWise feature.
3. In the "Domain name" field, type the name of a Cisco EnergyWise
domain where the PXE belongs. The domain name comprises up to
127 printable ASCII characters.
 Spaces and asterisks are NOT acceptable.
4. In the "Domain password" field, type the authentication password
(secret) for entering the Cisco EnergyWise domain. The password
comprises up to 127 printable ASCII characters.
 Spaces and asterisks are NOT acceptable.
5. In the Port field, type a User Datagram Protocol (UDP) port number
for communications in the Cisco EnergyWise domain. The port
ranges from 1 to 65535. Default is 43440.
6. In the "Polling interval" field, type a polling interval to determine how
often the PXE is queried in the Cisco EnergyWise domain. The
polling interval ranges from 30 to 600 seconds. Default is 180
seconds.
7. Click OK.