Raritan PXE, Руководство пользователя

Страница: 124 / 382

Chapter 6: Using the Web Interface
108
Gathering the RADIUS Information
To configure RADIUS authentication, you need to collect the RADIUS
information. If you are not familiar with the remote RADIUS information,
consult your RADIUS administrator for help.
Below is the RADIUS information to gather:

The IP address or host name of the RADIUS server

Authentication protocol used by the RADIUS server

Shared secret for a secure communication

UDP authentication port used by the RADIUS server

UDP accounting port used by the RADIUS server
Adding Authentication Servers
Add all external authentication servers that you want to use to the PXE.
Later you can use the sequence of the server list to control the
authentication servers' access priority.
Adding LDAP Server Settings
To activate and use external LDAP/LDAPS server authentication, enable
LDAP authentication and enter the information you have gathered for
any LDAP/LDAPS server.
Note: An LDAPS server refers to an SSL-secured LDAP server.
To add new LDAP/LDAPS server settings:
1. Choose Device Settings > Security > Authentication. The
Authentication Settings dialog appears.
2. Select the LDAP radio button to activate the LDAP/LDAPS
authentication.
3. Click New to add an LDAP/LDAPS authentication server. The
"Create new LDAP Server Configuration" dialog appears.
4. IP Address / Hostname - Type the IP address or hostname of your
LDAP/LDAPS authentication server.
Important: Without the SSL encryption enabled, you can type either
the domain name or IP address in this field, but you must type the
fully qualified domain name if the SSL encryption is enabled.
5. Type of LDAP server. Choose one of the following options:
 OpenLDAP