Raritan PX3TS, Руководство пользователя

Страница: 785 / 842

Appendix I: Additional PX3TS Information
761
Interface Client identifier conversion
ETH2
(PX3TS-iX7)
PEG1A00003-ETH2 = 50 45 47 31 41 30 30 30 30 33 2D
45 54 48 32

The suffix comprising the dash symbol and the
word "ETH2" is also converted.
WIRELESS PEG1A00003-WIRELESS = 50 45 47 31 41 30 30 30 30
33 2D 57 49 52 45 4C 45 53 53

The suffix comprising the dash symbol and the
word "WIRELESS" is also converted.
BRIDGE PEG1A00003 = 50 45 47 31 41 30 30 30 30 33
2. Separate the converted ASCII codes with a colon, and a prefix "00:"
must be added to the beginning of the converted codes.
For example, the converted client identifier of the ETHERNET or
ETH1 interface looks like the following:
00:50:45:47:31:41:30:30:30:30:33
3. Now enter the converted client identifier with the following syntax.
host mypx {
option dhcp-client-identifier = 00:50:45:47:31:41:30:30:30:30:33;
fixed-address 192.168.20.1;
}
Illustration without ASCII code conversion:
1. Use the original client identifier of the desired network interface. DO
NOT convert them into ASCII codes.
2. A prefix "\000" must be added to the beginning of the client identifier.
For example, the client identifier of the ETHERNET or ETH1 interface
looks like the following:
\000
PEG1A00003
3. Now enter the original client identifier with the following syntax. The
client identifier is enclosed in quotation marks.
host mypx {
option dhcp-client-identifier = "\000PEG1A00003";
fixed-address 192.168.20.1;
}