Raritan PX3TS, Руководство пользователя

Страница: 616 / 842

Chapter 8: Using the Command Line Interface
592
config:# authentication type <option1> useLocalIfRemoteUnavailable <option2>
Note: You cannot enable or disable the option of switching to local
authentication without determining the authentication type in the CLI.
Therefore, always type "authentication type <option1>" when setting up
"useLocalIfRemoteUnavailable".
Variables:

<option1> is one of the options:
local , ldap or radius.
Option Description
local Enable Local authentication only.
ldap Enable LDAP authentication.
radius Enable Radius authentication.

<option2> is one of the options:
true or false.
Option Description
true Remote authentication is the first priority. The
device will switch to local authentication when the
remote authentication is not available.
false Always stick to remote authentication regardless
of the availability of remote authentication.
LDAP Settings
All LDAP-related commands begin with
authentication ldap.
If you enable LDAP authentication, you must add at least one LDAP
server. Later you can modify or delete any existing LDAP server as
needed.