Raritan PX3TS, Руководство пользователя

Страница: 532 / 842

Chapter 8: Using the Command Line Interface
508
Setting the Outlet Power-On Sequence Delay
This section applies to outlet-switching capable models only.
This command sets the delays (in seconds) for outlets when turning on
all outlets in sequence.
config:# pdu outletSequenceDelay <outlet1>:<delay1>;<outlet2>:<delay2>;
<outlet3>:<delay3>;...
Separate outlet numbers and their delay settings with a colon. Outlets
followed by delays are separated with a semicolon.
Variables:

<outlet1>, <outlet2>, <outlet3> and the like are individual outlet
numbers or a range of outlets using a dash. For example,
3-8
represents outlets 3 to 8.

<delay1>, <delay2>, <delay3> and the like are the delay time in
seconds.
Note: Power-on sequencing is disabled in the latching mode. See PX3TS
Latching Relay Behavior
(on page 182).
Setting the PDU-Defined Default Outlet State
This section applies to outlet-switching capable models only.
This command determines the initial power condition of all outlets after
powering up the PDU.
config:# pdu outletStateOnDeviceStartup <option>
Variables:

<option> is one of the options: off, on or lastKnownState.
Option Description
off Switches OFF all outlets when the PX3TS device
powers up.
on Switches ON all outlets when the PX3TS device
powers up.