Raritan PX3TS, Руководство пользователя

Страница: 261 / 842

Chapter 6: Using the Web Interface
237
Sensor/Actuator Location Example
Use the X, Y and Z coordinates to describe each sensor's or actuator's
physical location in the data center. See
Individual Sensor/Actuator
Pages
(on page 232).
The X, Y and Z values act as additional attributes and are not tied to any
specific measurement scheme. Therefore, you can use
non-measurement values.
Example:
X =
Brown Cabinet Row
Y =
Third Rack
Z =
Top of Cabinet
Values of the X, Y and Z coordinates:

X and Y: They can be any alphanumeric values comprising 0 to 24
characters.

Z: When the Z coordinate format is set to Rack Units, it can be any
number ranging from 0 to 60. When its format is set to Free-Form, it
can be any alphanumeric value comprising 0 to 24 characters. See
PDU
(on page 176).
Feature Port
The FEATURE port supports connection to the following devices.
Device Description
Asset Strip Raritan asset strips
External
Beeper An external beeper with the RJ-45 socket.
LHX 20 Schroff
®
LHX-20 heat exchanger.
SHX 30 Schroff
®
SHX-30 heat exchanger.
LHX 40 Schroff
®
LHX-40 heat exchanger.
Power CIM This type represents one of the following Raritan
products:

Raritan power CIM, D2CIM-PWR. This CIM is used
to connect the PX3TS to the Raritan digital KVM
switch -- Dominion KX II / III.

Dominion KSX II

Dominion SX or SX II