Raritan PX3-3000 series, Руководство пользователя

Страница: 572 / 875

Chapter 8: Using the Command Line Interface
548
Example 4 - Adding an IPv4 Role-based Access Control Rule
The following command creates a newIPv4 role-based access control
rule and specifies its location in the list.
config:# security roleBasedAccessControl ipv4 rule add 192.168.78.50 192.168.90.100
admin deny insertAbove 3
Results:

A new IPv4 role-based access control rule is added, dropping all
packets from any IPv4 address between 192.168.78.50 and
192.168.90.100 when the user is a member of the role "admin."

The newly-added IPv4 rule is inserted above the 3rd rule. That is, the
new rule becomes the 3rd rule, and the original 3rd rule becomes
the 4th rule.
Outlet Configuration Commands
An outlet configuration command begins with outlet. Such a command
allows you to configure an individual outlet.
Changing the Outlet Name
This command names an outlet.
config:# outlet <n> name "<name>"
Variables:

<n> is the number of the outlet that you want to configure.

<name> is a string comprising up to 64 ASCII printable characters.
The <name> variable must be enclosed in quotes when it contains
spaces.