Raritan PX3-1000 series, Руководство пользователя

Страница: 76 / 744

Chapter 4: Connecting External Equipment (Optional)
54
DPX Sensor Packages
Most DPX sensor packages come with a factory-installed sensor cable,
whose sensor connector is RJ-12.
For the cabling length restrictions, see
Supported Maximum DPX
Sensor Distances
(on page 58).
Warning: For proper operation, wait for 15-30 seconds between each
connection operation or each disconnection operation of
environmental sensor packages.
To directly connect a DPX with a factory-installed sensor cable:
An RJ-12 to RJ-45 adapter is required to connect a DPX sensor package
to the PX3.
a. Connect the adapter's RJ-12 connector to the DPX sensor cable.
b. Connect the adapter's RJ-45 connector to the RJ-45 SENSOR
port of the PX3.
To directly connect a differential air pressure sensor:
1. Connect a Raritan-provided phone cable to the IN port of a
differential air pressure sensor.
2. Get an RJ-12 to RJ-45 adapter. Connect the adapter's RJ-12
connector to the other end of the phone cable.
3. Connect this adapter's RJ-45 connector to the RJ-45 SENSOR port
on the PX3.