Raritan PX3-1000 series, Руководство пользователя

Страница: 408 / 744

Chapter 8: Using the Command Line Interface
386
Displayed information:

Without the parameter "details," only the reading, state, threshold,
deassertion hysteresis and assertion timeout settings of the
specified inlet sensor are displayed.

With the parameter "details," more sensor information is displayed,
including resolution and range.

If the requested sensor type is not supported, the "Sensor is not
available" message is displayed.
Inlet Pole Sensor Threshold Information
This command is only available for a three-phase PDU except for an
in-line monitor (PX-3000 series).
This command syntax shows the specified inlet pole sensor's
threshold-related information.
# show sensor inletpole <n> <p> <sensor type>
To show detailed information, add the parameter "details" to the end of
the command.
# show sensor inletpole <n> <p> <sensor type> details
Variables:

<n> is the number of the inlet whose pole sensors you want to query.
For a single-inlet PDU, <n> is always the number 1.

<p> is the label of the inlet pole whose sensors you want to query.
Pole Label
<p> Current sensor Voltage sensor
1 L1 L1 L1 - L2
2 L2 L2 L2 - L3
3 L3 L3 L3 - L1

<sensor type> is one of the following sensor types:
Sensor type Description
current Current sensor
voltage Voltage sensor
activePower Active power sensor