Raritan PX3-1000 series Скачать руководство пользователя страница 373

Страница: 373 / 744

Chapter 6: Using the Web Interface

351

To reset the device to factory defaults:

Choose Maintenance > Unit Reset >

Click Factory Reset to reset the PX3 to factory defaults.

A message appears, with a countdown timer showing the remaining
time of the operation. It takes about two minutes to complete.

When the reset is complete, the login page opens.

Note: If you are not redirected to the login page after the reset is
complete, click the text "this link" in the countdown message.

Alternative:

There are two more methods to reset the device to factory defaults.



Use the "mechanical" reset button



Perform the CLI command

For details, see

Resetting to Factory Defaults

(on page 585).

Retrieving Software Packages Information

You can check the current firmware version and the information of all
open source packages embedded in the PX3 device through the web
interface.

To retrieve the embedded software packages information:

Choose Maintenance > About iPDU. A list of open source packages is
displayed.

You can click any link to access related information or download any
software package.

Содержание PX3-1000 series








































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PX3-1000 series

Отзывы:

Raritan PX3-1000 series, Руководство пользователя, Страница: 373 / 744

Результаты поиска

Содержание PX3-1000 series

Отзывы: