Chapter 2: Rackmount, Inlet and Outlet Connections
14
2.
Screw the L-bracket to the device and ensure the bracket is fastened
securely.
3.
Repeat Steps 1 to 2 to screw another L-bracket to the bottom of the
device.
4.
After both L-brackets are installed, you can choose either of the
following ways to mount the device in the rack.
Using rack screws, fasten the device to the rack through two
identical holes near the edge of each L-bracket.
Mount the device by screwing a mounting button in the back
center of each L-bracket and then having both buttons engage
the mounting holes in the rack. The recommended torque for the
button is 1.96 N·m (20 kgf·cm).
Mounting 1U or 2U Models
Using the appropriate brackets and tools, fasten the 1U or 2U device to
the rack or cabinet.
To mount the PX3 device:
1.
Attach a rackmount bracket to both sides of the PX3 with the
provided screws.
Содержание PX3-1000 series
