Raritan PX2-1000 SERIES, Руководство пользователя

Страница: 69 / 648

Chapter 4: Connecting External Equipment (Optional)
50
Mixing Diverse Sensor Types
You can mix DPX, DPX2, DPX3 and DX sensor packages on one PX
according to the following sensor combinations. In some scenarios, the
DPX3-ENVHUB4 sensor hub is required.
The PX does NOT support any other sensor-mixing combinations than
those described in this section.
When mixing different sensor types, remember that the PX supports a
maximum of 32 sensors/actuators.
1 DX + 1 DPX:

An RJ-12 to RJ-45 adapter cable is required for connecting the DX
sensor package to the PX.

It is strongly recommended to use an RJ-12 to RJ-45 adapter to
connect the DPX sensor package to the DX sensor package.
Diverse combinations via the DPX3-ENVHUB4 sensor hub:

You must use the
DPX3
-ENVHUB4 sensor hub instead of the old
DPX-ENVHUB4 sensor hub. Each port on the hub supports any of
the following:
 A DX sensor package
 A chain of DX sensor packages
 A DPX3 sensor package
 A chain of DPX3 sensor packages
 A DPX2 sensor package
 A DPX sensor package