Raritan PX2-1000 SERIES, Руководство пользователя

Страница: 372 / 648

Chapter 8: Using the Command Line Interface
353
Inlet Sensor Threshold Information
This command syntax shows the specified inlet sensor's
threshold-related information.
# show sensor inlet <n> <sensor type>
To show detailed information, add the parameter "details" to the end of
the command.
# show sensor inlet <n> <sensor type> details
Variables:

<n> is the number of the inlet whose sensors you want to query. For
a single-inlet PDU, <n> is always the number 1.

<sensor type> is one of the following sensor types:
Sensor type Description
current Current sensor
voltage Voltage sensor
activePower Active power sensor
apparentPower Apparent power sensor
powerFactor Power factor sensor
activeEnergy Active energy sensor
unbalancedCurrent Unbalanced load sensor
lineFrequency Line frequency sensor
Displayed information:

Without the parameter "details," only the reading, state, threshold,
deassertion hysteresis and assertion timeout settings of the specified
inlet sensor are displayed.

With the parameter "details," more sensor information is displayed,
including resolution and range.

If the requested sensor type is not supported, the "Sensor is not
available" message is displayed.