Raritan PX2-1000 SERIES, Руководство пользователя

Страница: 238 / 648

Chapter 6: Using the Web Interface
219
3. In the "Action name" field, type a new name for the action. The
default name is New Action <number>, where <number> is a
sequential number starting at 1.
4. In the Action field, click the drop-down arrow and select the desired
action: External beeper.
5. From the Beeper Port drop-down list, select the port where the
external beeper is connected. This port is the FEATURE port.
6. From the Beeper Action drop-down list, select an action for the
external beeper to carry out.
 Alarm: Causes the external beeper to sound an alarm cycle
every 20 seconds - stays on for 0.7 seconds and then off for
19.3 seconds.
 On: Turns on the external beeper so that it buzzes continuously.
 Off: Turns off the external beeper so that it stops buzzing.
7. Click OK.
Note: If you create an event rule for the external beeper but disconnect it
when an event causes it to beep, the beeper no longer beeps after it is
re-connected even though the event triggering the beeping action
remains asserted.
Log an Event Message
This option records the selected events in the internal log.
To create a log event message:
1. Choose Device Settings > Event Rules. The Event Rules Settings
dialog opens.
2. Click the Actions tab.
3. Click New.
4. In the "Action name" field, type a new name for the action. The
default name is New Action <number>, where <number> is a
sequential number starting at 1.
5. In the Action field, click the drop-down arrow and select the desired
action: Log event message.
6. Click OK.