Raritan PX2-1000 SERIES, Руководство пользователя

Страница: 232 / 648

Chapter 6: Using the Web Interface
213
Event Rules and Actions
A benefit of the product's intelligence is its ability to notify you of and
react to a change in conditions. This event notification or reaction is an
"event rule."
The PX is shipped with four built-in event rules, which cannot be deleted.

System Event Log Rule: This causes ANY event occurred to the PX
to be recorded in the internal log. It is enabled by default.

System SNMP Notification Rule: This causes SNMP traps or informs
to be sent to specified IP addresses or hosts when ANY event
occurs to the PX. It is disabled by default.

System Tamper Detection Alarmed: This causes the PX to send
alarm notifications if a DX tamper sensor has been connected and
the PX detects that the tamper sensor enters the alarmed state.

System Tamper Detection Unavailable: This causes the PX to sends
alarm notifications if a DX tamper sensor has been connected and
the PX detects that the communication with the connected tamper
sensor is lost.
If these do not satisfy your needs, you can create additional rules to
respond to different events. You need the Administrator Privileges to
configure event rules.
Note: Internet Explorer
®
8 (IE8) does not use compiled JAVA script.
When using IE8 to create or change event rules, the CPU performance
may be degraded, resulting in the appearance of the connection time out
message. When this occurs, click Ignore to continue.
Components of an Event Rule
An event rule defines what the PX does in certain situations and is
composed of two parts:

Event: This is the situation where the PX or part of it meets a certain
condition. For example, the inlet's voltage exceeds the warning
threshold.

Action: This is the response to the event. For example, the PX
notifies the system administrator of the event and records the event
in the log.
Creating an Event Rule
The best way to create a new set of event rules in sequence is to:

Create actions for responding to one or multiple events

Create rules to determine what actions are taken when these events
occur