Raritan PX2-1000 SERIES, Руководство пользователя

Страница: 228 / 648

Chapter 6: Using the Web Interface
209
7. To set the assertion timeout, type a numeric value in the Assertion
Timeout (samples) field. See
"To Assert" and Assertion Timeout
(on page 595).
8. Click OK in the threshold setup dialog to retain the changes.
9. To set the thresholds for other sensors, repeat Steps 4 to 8.
10. Click OK.
Important: The final step is required or the threshold changes are not
saved.
Setting an Overcurrent Protector's Thresholds
Setting the overcurrent protector thresholds enables the PX to generate
alerts when any overcurrent protector crosses the thresholds.
To set thresholds for an overcurrent protector:
1. Expand the Overcurrent Protectors folder in the PX Explorer pane if
needed. See
Expanding the Tree
(on page 96).
2. In the PX Explorer pane, click the desired overcurrent protector. The
page specific to that overcurrent protector opens in the right pane.
3. Click Setup. The Overcurrent Protector Setup dialog appears.
4. In the Threshold Configuration table, click the sensor whose
thresholds you want to configure.
5. Click Edit or double-click the desired sensor. A threshold setup
dialog appears.
6. Configure the Lower Critical, Lower Warning, Upper Warning and
Upper Critical thresholds respectively.
 To enable any threshold, select the corresponding checkbox. To
disable a threshold, deselect the checkbox.
 After any threshold is enabled, type an appropriate numeric value
in the accompanying text box.
7. To set the deassertion hysteresis, type a numeric value in the
Deassertion Hysteresis field. See
"To De-assert" and Deassertion
Hysteresis
(on page 597).
8. To set the assertion timeout, type a numeric value in the Assertion
Timeout (samples) field. See
"To Assert" and Assertion Timeout
(on page 595).
9. Click OK.