Raritan PX2-1000 SERIES, Руководство пользователя

Страница: 214 / 648

Chapter 6: Using the Web Interface
195
3. In the "Power off period during power cycle" field, click the
drop-down arrow and select an option from the list. Valid range is
zero second to one hour.
Time units in the list are explained below:
 s: second(s)
 min: minute(s)
 h: hour(s)
You can also type a value if the desired time is not listed. For
example, type "15 s" for 15 seconds.
4. Click OK.
Tip: When there are a large number of outlets, set the value to a lower
number so that you can avoid a long wait before all the outlets are
available again.
Changing the Outlet-Specific Cycling Power-Off Period
This section applies to outlet-switching capable models only.
When the power cycling occurs, the default power-off period of each
outlet follows the PDU-defined setting. You can adjust the power-off
period of a particular outlet so that it is turned back on after a different
power-off period.
Setting the power-off period for a particular outlet to a value other than
"PDU defined" overrides the PDU-defined setting on that outlet.
To set the power-off period for a specific outlet:
1. Expand the Outlets folder in the PX Explorer pane to show all outlets.
See
Expanding the Tree
(on page 96).
2. In the PX Explorer pane, click the outlet you want. The page specific
to that outlet opens in the right pane.
3. Click Setup in the right pane. The setup dialog for the selected outlet
appears.
Tip: Another way to trigger the same dialog is to use the Outlets
page. Select the Outlets folder, highlight the outlet on the Outlets
page and then click Setup at the bottom of the page.
4. In the "Power off period during power cycle" field, click the
drop-down arrow and select an option from the list. Valid range is
zero second to one hour.
Time units in the list are explained below:
 s: second(s)