Raritan PMC-1000, Руководство пользователя, Страница: 292 / 621

Chapter 3: Using the Web Interface
280
Note: In case you need to type any square brackets "[" and "]" in the
custom message for non-placeholder words, always add a backslash in
front of the square bracket. That is, \[ or \]. Otherwise, the message sent
will not display the square brackets.
Editing or Deleting a Rule/Action
You can change the settings of an event rule, action or scheduled action,
or delete them.
Exception: Some settings of the built-in event rules or actions are not
user-configurable. Besides, you cannot delete built-in rules and actions.
See
Built-in Rules and Rule Configuration
(on page 231) or
Available
Actions
(on page 250).
To edit or delete an event rule, action or scheduled action:
1. Choose Device Settings > Event Rules.
2. Click the desired one in the list of rules, actions or scheduled actions.
Its setup page opens.
3. Perform the desired action.

To modify settings, make necessary changes and then click Save.

To delete it, click on the top-right corner. Then
click Delete on the confirmation message.
Sample Event Rules
Sample PDU-Level Event Rule
In this example, we want the BCM2 to record the firmware upgrade
failure in the internal log when it happens.
The event rule involves:
• Event: Device > Firmware update failed
• Action: System Event Log Action
To create this PDU-level event rule:
1. For an event at the PDU level, select "Device" in the Event field.
2. Select "Firmware update failed" so that the BCM2 responds to the
event related to firmware upgrade failure.