background image

Assembly Instructions:

 

 

Tools Required:

 

Screwdriver, Electric Drill, Pencil, Measuring tape/Ruler

*Tools are not included.

Skill Required:

The Assembly Skill Rating is a 5-point system that shows the degree of effort needed in assembling a specific product. 

With 1 being easy for the average person and 5 requiring an expert. For most products, two persons are recommended.

Time Required:

 

25 minutes

Easy

Hard

Product Code : TTR189 / TTR2412 / TTR3212

Product Name: Typhoon Boardroom Table

NOTE

• As this is a commercial product, some intermediate skills may be required.

• No pre-drill holes or markings are provided on our table or desk tops.

• Please check you have all hardware before assembling.

• If you are missing any hardware, please contact your Rapidline reseller. Please ensure you have the name of the item,

required hardware part and quantity.

• Please retain your receipt as proof of purchase to validate your warranty.

• Assemble on a clean, flat, smooth surface such as a rug or carpet to avoid parts from being scratched.

• Remove all wrapping materials, including staples and packing straps before you start to assemble

• Keep all hardware parts out of reach of children.

CAUTION

• Heavy product. Do not attempt to lift or move without help

• Do not tighten screws and bolts until completely assembled.

• Do not use this product unless all bolts and screws are firmly secured and tightened.

WARNING

• If parts are missing, broken, damaged or worn stop using the product until all repairs are made.

• Failure to follow these warnings could result in serious injury.

Содержание Typhoon TTR189

Страница 1: ...e assembling If you are missing any hardware please contact your Rapidline reseller Please ensure you have the name of the item required hardware part and quantity Please retain your receipt as proof of purchase to validate your warranty Assemble on a clean flat smooth surface such as a rug or carpet to avoid parts from being scratched Remove all wrapping materials including staples and packing st...

Страница 2: ...th MS Bolts Do Not Completely Tighten Bolts Once The Frame Is Sitting Flush On the Flat Surface Tighten All Bolts Completely TF189 M8 16H G MS 16H 28pcs M5 20H 12pcs M12 lpcs M6 lpcs M6 lpcs 16 lpcs CD Slide Both The Bottom And Top Cross Bar Into The Left Right Hand Side End Uprights Attach Cross Bars With MB Bolts Do Not Completely Tighten Bolts ...

Страница 3: ...h MB Bolts Do Not Completely Tighten Bolts Once The Frame Is Sitting Flush On the Flat Surface Tighten All Bolts Completely TF2412 M8 16H G MS 16H 28pcs M5 20H 12pcs M12 lpcs M6 lpcs M6 lpcs 16 lpcs CD Slide Both The Bottom And Top Cross Bar Into The Left Right Hand Side End Uprights Attach Cross Bars With MB Bolts Do Not Completely Tighten Bolts ...

Страница 4: ...cs 16 lpcs Layout Left Right and Central Leg Upside Down On a Flat Surface Slide Central Support Beams Into Legs Attach Support Beams With M8 Bolts Do Not Completely Tighten Bolts Once The Frame Is Sitting Flush On the Flat Surface Tighten All Bolts Completely CD Slide Both The Bottom And Top Cross Bar Into The Left Right Hand Side End Uprights Attach Cross Bars With M8 Bolts Do Not Completely Tig...

Отзывы: