Rapid 2005, Инструкция по установке, эксплуатации и обслуживанию

Страница: 49 / 162

SECTION 11: F
ILTER
S
ECTION
39 of 147
Step 11.3.5
Step 11.3.6
Attach the remaining filter rails w ith fo u r TEK
self-tapping scre w s, t w o on each side. Ens u re
that the rails face into the filter section.
NOTE: For easier installation, the filter section
may be mo u nted to the air handler at this point,
prior to the addition of filters and access door.
Refer to
Page 43, Section 11.5 for installation
instr u ctions.
Description Part Number
Filter Rail 13X05030
TEK Scre w 13404
Load filters into the filter section.
Check that each filter in in the proper
orientation.
For permanent aluminum mesh
filters: Verify the arro w on the side of
the filter points in the direction of the
airflo w .
For disposable polyester filters:
Verify the w hite side is facing the inlet
and the bl u e side is facing the
discharge end.
The end ro w s of filters need to be
installed first.
NOTE: When the filter section is
installed on the air handler, the top of
one ro
w of filters w ill s u pport the
bottom of the abo v e ro w .
Description Part Number
Permanent Al u min u m Mesh Filters 20629 and/or 20628
Disposable Polyester Filters 23628/23631