Rapid 2005, Инструкция по установке, эксплуатации и обслуживанию

Страница: 146 / 162

B-S
ERIES
I
NSTALLATION
, O
PERATION AND
S
ERVICE
M
ANUAL
136 of 147
SECTION 22: TROUBLESHOOTING
Electrical Shock Hazard
Disconnect electric before service.
More than one disconnect switch may be
required to disconnect electric from
equipment.
Equipment must be properly grounded.
Severe Injury Hazard
Do not enter equipment while in operation.
Equipment may start automatically.
Do not operate with door open.
Installation, operation and service must be
done by a trained technician only.
DANGER
Failure to follow these instructions can result in death, electrical shock or injury.
Falling Hazard
Use proper safety
equipment and
practices to avoid
falling.
Do not use any
part of equipment
as support.
WARNING
Failure to follow these instructions can result in death, injury or property damage.
Burn Hazard
Allow equipment
to cool before
service.
Internal compo-
nents of
equipment may
still be hot after
operation.
Explosion Hazard
Turn off gas
supply to
equipment before
service.
Fire Hazard
Keep all
flammable
objects, liquids
and vapors the
minimum required
clearances to
combustibles
away from
equipment.
Some objects will
catch fire or
explode when
placed close to
equipment.
Cut/Pinch Hazard
Wear protective
gear during
installation,
operation and
service.
Edges are sharp.