W A R N I N G
!
The solvent supply must be interlocked with
the applicator supply air.
2. Disconnect air to applicator.
OR...
3. Discharge fluid into appropriate earth grounded
metal container
4. Load next color, solvent flush and/or remove
applicator from installation as required.
FLUID NOZZLE / AIR CAP
The fluid nozzle and air cap must be selected according
to the application. The following charts show the nozzles
and air caps available for the Ransflex.
Nozzles from previous Ransburg design
are not compatable with the Ransflex design.
Use of these nozzles could cause equipment
malfunction and possible damage.
CAUTION
!
NEW NOZZLE DESIGN
With the release of the Ransflex applicator a new
configuration of nozzles was also released.
Red nozzles - 1.2 mm I.D.
Grey nozzles - 1.4 mm I.D.
Green nozzles - 1.8 mm I.D.
All other accessory sizes are black
Air cap to
be used with
nozzle.
Air cap part
number
AH-15-01.2
24
Ranflex Applicators
-
OPERATION
