INTRODUCTION
RANSFLEX NEW FEATURES
• Light weight and easy to maneuver.
• Ergonomic handle design to reduce
operator fatigue.
• Three phases of turbine protection:
- Divorced turbine air supply cartridge
- Sealed nozzle/Atomization passages
- Strategic turbine location
• DeVilbiss spray technology integration
into atomization.
• Simultaneous fan/atom pressure adjustment with
compensation valve.
GENERAL DESCRIPTION
The
Ransflex
is an air atomizing applicator powered
only by a pressurized air source. Pressurized air creates
rotation of a turbine generator that powers a cascade.
The cascade generates a high voltage DC charge to
the electrode creating an electrostatic field between
the atomizer and the target.
One of the many features of the Ransflex applicator
system is that the electrical energy, which is available
from the resistive charging electrode, is limited to the
optimum level of safety and efficiency. The system is
incapable of releasing sufficient electrical or thermal
energy during normal operating conditions to cause
ignition of specific hazardous materials in their most
easily ignited concentrations in air.
As the applicator electrode approaches ground,
applicator circuitry causes the high voltage to approach
zero while the current approaches its maximum value.
This performance is validated by independent test
agencies that give ATEX EN 50050 approvals or FM
7260 approvals.
This Ransflex model is designed specifically for direct
charge waterbase applications only. The waterborne
fluid supply system must be isolated from ground to
allow proper electrostatic charging of the fluid.
The water base materials must be classified as non-
flamable spray material. This means the mixture with air
cannot be ignited by an energy source less than 500 mJ.
AH-17-04-R0.0 (11/2017)
14 / 59
www.carlisleft.com
INTRODUCTION