Fluid Nozzle Removal
1. Insert 80353-00 wrench onto nozzle flats.
2. O-ring in barrel, replace as required.
3. Install fluid nozzle using 80353-00 wrench. Tighten till
nozzle seats on O-ring and then 1/8 additional turn.
2. Clean and replace as necessary.
3. Install in reverse order.
Barrel Removal
1. Remove trigger.
W A R N I N G
!
NOTE
Prior to removing the fluid nozzle, all pressure
from the system must be relieved.
Do not over tighten. Fan pattern reduction
will be effected
AH-17-04-R0.0 (11/2017)
31 / 59
www.carlisleft.com
MAINTENANCE
