background image

LIMITED WARRANTY

RANKIN EQUIPMENT/NORTHSTAR ATTACHMENTS warrants each new 

RANKIN/NORTHSTAR product to be free from defects in material and

workmanship for a period of twelve (12) months from date of purchase to the 

original purchaser. This warranty shall not apply to implements or parts that 

have been subject to misuse, negligence, accident, or that have been altered in 

any way.

Our obligation shall be limited to repairing or replacement of any part, provided 

that such part is returned within thirty (30) days from date of failure to RANKIN/

NORTHSTAR through the dealer from whom the purchase was made,

transportation charges prepaid.

This warranty shall not be interpreted to render us liable for injury or damages 

of any kind or nature, direct, consequential or contingent, to person or property. 

This warranty does not extend to loss of crops, loss because of delay in

harvesting or any other expenses, for any other reasons.

RANKIN/NORTHSTAR in no way warranties engines, tires, or other trade 

accessories, since these items are warranted separately by these respective 

manufacturers.

RANKIN/NORTHSTAR reserves the right to make improvements in design or 

changes in specification at any time, without incurring any obligations to owners 

or units previously sold.  

RANKIN EQUIPMENT/NORTHSTAR ATTACHMENTS

3205 BAY STREET

UNION GAP, WA 98903

Always refer to and heed machine operating warning decals on machine.  

Содержание UBG






































Отзывы: