Rangemaster INC90DFFBL, Руководство пользователя и инструкции по установке

Страница: 28 / 44

INSTALLATION
Check the appliance is electrically safe and gas sound when you have finished.
24
Checking the Parts:
3 pan supports Grill pan & trivet
ArtNo.000-0001 90 Pan supports
Griddle plate 2 flat shelves
ArtNo.311-0043 - Griddle 09
Tall oven shelves and shelf supports Magnetic plinth
ArtNo.000-0010 Tall oven shelves
Stability location bracket
Location of Cooker
The cooker may be installed in a kitchen/kitchen diner but
NOT in a room containing a bath or shower.
This appliance is designed for domestic cooking only. Use for
any other purpose could invalidate any warranty or liability
claim.
Note: An appliance for use on LPG must not be installed
in a room or internal space below ground level, e.g. in a
basement.
You will need the following equipment to complete the
cooker installation satisfactorily:
• Stability bracket: If the cooker is to be supplied with
gas through a flexible hose, a stability bracket or chain
MUST be fitted. These are not supplied with the
cooker but are available at most builders’ merchants.
• Gas pressure tester/manometer.
• Flexible gas hose: Must be in accordance with the
relevant standards.
• Multimeter: For electrical checks.
You will also need the following tools:
1.
Electric drill
2.
Masonry drill bit (only required if fitting the cooker on a
stone or concrete floor)
3. Wall plugs (only required if fitting the cooker on a stone
or concrete floor)
4.
Steel tape measure
5. Cross head screwdriver
6.
Flat head screwdriver
7. Spirit level
8.
Pencil
9. Adjustable spanner
10. Allen keys (for Classic – supplied)
11. Screws for fitting stability bracket
12. 13 mm spanner (or socket wrench)