Manual-1
OPERATORS MANUAL
QUICK START
Conect the output from any stereo source such as a mixer or tape deck, and plug the left and right inputs into the
respective
INPUT
jacks. The Inputs accept balanced or unbalanced sources. Just plug them in. This source is now routed to
each of the four Outputs.
For a single mono source feeding all headphones, connect it to either one of the
INPUT
jacks and engage the
STEREO/
MONO
switch. Set the
CHANNEL LEVEL
controls for individual headphone levels.
Never connect anything except a Rane power supply to the thing that looks like a telephone jack on the rear of the
unit.
This is an AC input and requires special attention if you do not have a power supply
exactly
like the one originally
packed with your unit. See the full explanation of the power supply requirements elsewhere in this manual.
WEAR PARTS:
This product contains no wear parts.
MH 4
HEADPHONE AMPLIFIER
