Available Digital Remote Models
Following are the types of DRs currently available for your HAL System. The DR models available will
vary over time as Rane's engineers ponder and design new and better ways to remotely control an audio
system. For the most current list of DRs, see the Rane website.
NOTE
:
Each of these DRs mounts inside a US one-gang or two-gang switchbox. See the Rane web-
site for a detailed listing of acceptable models of switchboxes. Note that the Decora plates for the
DRs are included.
NOTE FOR DRAG NET USERS
:
Remember the SR3 remote for Drag Net systems and how it was too
wide to allow the mounting of two or more of them beside each other in a standard switch box?
You will be happy to know that the HAL System DRs can be mounted directly beside each other
in any combination, allowing you to use several DRs in the same two, three, or four-gang switch-
box.
NOTE
:
DR display screens are dynamic, automatically updating when the available options change
through preset activation, room combining, and so on. Therefore, the user always sees the options
that are currently available.
DR1
A DR1 provides a single level control. A DR1 is used most commonly to control volume.
NOTE
:
A DR1 requires a one-gang standard switchbox for installation into a wall.
CHAPTER 2: Hardware Component Details
21
