Data Sheet-2
DR1 Architects & Engineers
Specification
The digital remote shall control one or more simultaneous
levels and be located up to 300 meters (1,000 feet) away from
the rack room multiprocessor. The digital remote shall have
a customizable backlit LCD screen for end user labeling with
variable and automatic backlight dimming feature for superior
visibility under varying light conditions. The digital remote shall
connect to and be powered by the rack room multiprocessor
using a dedicated homerun over shielded CAT 5e (or better)
cable. Low communication data rates shall permit use of
punch-down blocks or RJ-45 patch bays for homerun cable
routing flexibility as well as relaxed minimum bend radius. The
shielded CAT 5e interface shall transport power, ground and
a communications channel. The digital remote shall support
portable use and hot-swapping so that devices may be replaced
without reprogramming or shutting down the system, and do so
without audio interference. Within seconds, all settings for new
or existing portable digital remotes shall automatically download
from the multiprocessor along with the correct firmware
permitting continuous hot-swapping – even between different
vintage multiprocessors. The hardware-software combination
shall automatically check and display the status, location, and
CAT 5e crimp and wiring integrity. Hardware and software
troubleshooting indications shall point out any and all errors.
The digital remote shall fit into a 1-gang US standard electrical
junction box. The digital remote shall be available in white, ivory
or black, and come with a matching Decora® wallplate.
The Digital Remote shall be a Rane DR1 connected to a Rane
HAL multiprocessor or EXP expander running Rane Halogen
software.
All features & specifications subject to change without notice.
©Rane Corporation 10802 47th Ave. W., Mukilteo WA 98275-5000 TEL 425-355-6000 FAX 425-347-7757 WEB rane.com
DR1
DIGITAL REMOTE
1.605
4.100
2.813
Dimensions
