R&S ZVAX-TRM, Руководство пользователя

Страница: 6 / 32

About the Extension Unit
R&S
®
ZVAX-TRM
6 User Manual 1325.1268.02 ─ 04
Direct access to
SOURCE and
MEAS paths
Replaced by
ports 1 and 2 on
the extension unit
Figure 1-1: 4-port R&S ZVA with extension unit R&S ZVAX-TRM
The extension unit is fully controlled by the analyzer firmware (V3.30 or higher); the
management connection is established via USB. Internal components and external
user paths of the R&S
ZVAX-TRM can be selectively enabled/disabled from the firm-
ware on a per-channel basis. Also, the adequate a-wave access can be selected per
channel and port.
The R&S ZVAX-TRM base unit offers two test ports equipped with high-power direc-
tional couplers (up to +43 dBm) and supports user-defined source and measurement
path extensions via front access connectors. It is available in four variants:
●
R&S ZVAX-TRM24: frequency range 10 MHz to 24 GHz (3.5 mm connectors)
●
R&S ZVAX-TRM40: frequency range 10 MHz to 40 GHz (2.92 mm connectors)
●
R&S ZVAX-TRM50: frequency range 10 MHz to 50 GHz (2.4 mm connectors)
●
R&S ZVAX-TRM67: frequency range 10 MHz to 67 GHz (1.85 mm connectors)
Internal signal conditioning modules (pulse modulators, output amplifiers, combiners,
low noise preamplifiers) are available as options; see
Chapter 4, "Models and
Options" , on page 27.
Features