VNA GUI reference
R&S
®
ZNL/ZNLE
552
User Manual 1178.5966.02 ─ 19
Remote command:
10.14.5
Port Sets tab
Selects transformation networks for deembedding/embedding arbitrary port sets,
defines their parameters, assigns them to a port set and enables embedding.
Use the complementary dock widget to create the required port sets and to activate or
deactivate dembedding/embedding for selected port sets (see
Background information
Refer to
Chapter 9.6.2.5, "Port pair de-/embedding"
If the "Fixture Simulator" is disabled for the related channel (see
on page 527), this tab is inactive, i.e. all controls except the "Overview" button are
grayed out.
Overview
See
Type
Switches between "Deembedding" and "Embedding" network definition.
Offset Embed softtool